swirl chamber

Inquiry into Increasing Thermal Efficiency of Diesel Engine by Insulating Swirl Chamber

涡流室隔热提高柴油机效率的探讨

A Study on Air Motion in Diesel Swirl Chamber by LDA

用LDA研究柴油机涡流室内空气运动

Introduces a new sensor to strictly measure the pressures and pressure differences of main and pre chambers in swirl chamber diesel engines, and analyzes the influences of the pressure measurement error from the sensor on calculating the heat release rate and discharge of connecting passage.

介绍了一种新型精确测量涡流室式燃烧室主、副室压差的传感器，并分析了这种传感器引起的压力测量误差对通道流量及放热率计算结果的影响。

New Configuration Design of the Swirl Chamber of Diesel Engines

柴油机涡流室新的结构设计

The quality of mixture has important influence on exhaust emissions swirl chamber diesel engines.

通过改进柴油机供油系统和利用废气再循环来改善混合气质量和燃烧过程,进而降低其有害排放.

A further study on the function of starting throat for improving the cold startability of swirl chamber diesel engines was made.

本文对于利用起动孔以改善涡流室式柴油机起动性能的作用机理，在前人研究基础上，作了进一步的探讨。

An Experimental and Calculating Study on Swirl Chamber Flow Field in a Diesel Engine

柴油机涡流室内流场的实验和计算研究

Multidimensional Numerical Simulation of Spray Process in Swirl Chamber of IDI Diesel Engine The fuel-air injection and mixing is one of the most important research issues.

涡流室柴油机燃油与空气混合过程的多维数值模拟要成功起始爆震首先要解决燃油、空气的喷射与混合问题。

Two& Dimensional Numerical Modeling of Flow Field in Swirl Chamber of IDI Diesel Engine

涡流室式柴油机燃烧室内流场的二维数值模拟

Three Dimensional Numerical Modeling for Air Motion in Swirl Chamber Diesel Engine

涡流室式柴油机空气运动的3维数值模拟

As the air inlet diameters increase, the intake central swirl is intensified and thus fuel evaporation in the first combustion chamber is improved.

加大进气孔直径使进气中心涡流增强，燃油在一级燃烧室中蒸发量增加。

A New Method for Analyzing Combustion Process on Swirl Chamber Diesel Engines

研究涡流室式柴油机燃烧过程的新方法

Design and Experimental Investigation of Ceramic Hot Plug for Swirl Chamber

涡流室陶瓷镶块的设计及试验研究

Besides, the process of methane wet-air autothermal reforming in the specific micro-tube and micro-swirl chamber is researched by numerical method. Meanwhile, the influences of reaction conditions, component ratio, and other factors on the H2 and carbon deposition from reforming in micro-channel are discussed.

通过对甲烷湿空气在微细圆管腔和微型旋流腔中低温自热重整过程的数值模拟，研究了反应条件、组分比例等因素对微通道内自热催化重整产氢及积炭的影响。

The swirl chamber diesel engine with ethanol-diesel fuel has a bright marketing future.

燃用乙醇柴油的涡流室柴油机有着很好的应用前景.

Experimental Study on a Swirl Chamber Diesel Engine with Ethanol diesel Fuel

涡流室柴油机燃用乙醇柴油的试验研究

This article also gives reasons for the difficulty in starting swirl chamber diesel engines in cold-starting condition, points out the way to improve the cold startability.

在此基础上，阐明了涡流室式柴油机冷起动困难的基本原因，为改善这类柴油机的冷起动性能指出了方向和途径。

Research on the New Material for Swirl Chamber Insert in Diesel Engine

柴油机涡流室镶块材料的研究

Application of Heat Release Model to Swirl Chamber Diesel

涡流室式柴油机放热模型的应用研究

Improving combustion for reducing exhaust emissions is a top research project swirl chamber engines.

系统报道了通过改进燃烧室结构设计降低排放的实验方法和手段.

The simulation and experimental results showed that the restriction effect of the spit hole on the swirl chamber could improve the heat transfer and mass transport model between the gas burned and unburned, which could increase the flame propagation rate.

模拟计算及试验结果表明，通过涡流室喷孔的约束作用，可以改善已燃气体和未燃气体之间的传热传质模式，提高火焰传播速度。